Loading ...
Loading ...
Loading ...
32 Setting Oven Controls
What to do after a power failure or power interruption when
Sabbath mode is active:
Should a power failure or interruption occur during the Sabbath
holidays, the appliance will shut off. SF will appear in all the
control display, indicating a Sabbath mode failure (Figure 28).
Sabbath Failure mode will remain and the oven will not work
until Sabbath mode is cancelled.
After Sabbath mode is cancelled, Sabbath mode settings may
be entered again.
Adjusting Oven Temperatures
Your appliance has been factory calibrated and tested to ensure
accurate baking temperatures. For the first few uses, follow
your recipe times and temperature recommendations carefully.
If you think the oven is cooking too hot or too cool for your
recipe times, you may adjust the control so the oven cooks
hotter or cooler than the oven temperature displayed.
IMPORTANT! Do not use oven thermometers such as those
found in grocery stores to check the temperature settings inside
your oven. These oven thermometers may vary as much as
20°F to 40°F degrees from actual temperatures. The oven
temperature may be increased as much as +35°F (+19°C) or
decreased -35°F (-19°C) from the factory calibrated settings.
To increase the oven temperature by 20°F:
1. Press and hold bake.
2. The factory offset temperature of 0 (zero) should appear in
the display.
3. Enter 2 0 using numeric keys.To offset the oven by -20°F,
press self clean to toggle to the minus (-) setting.
Press START to accept change.
Oven temperature adjustments will not change the broil or self
clean function temperatures.
Restoring Control to Factory Default Settings
Your appliance is set with a number of predetermined oven con-
trol settings. Over time you may make changes to the original
factory settings. The following functions or features have user
programmable options or adjustments that may have been
changed from the default settings.
•Clock 12-hour or 24-hour display mode
•12 Hour Energy Savings or Continuous Bake mode
•Oven temperature display mode (F° or C°)
•Any oven temperature adjustment made
IMPORTANT! Before restoring, be aware that any previous
changes made to the oven control settings will be erased once
the keypad is pressed. This includes any temperature offset
made for the oven when baking.
To restore factory default settings:
1. Press and hold numeric key 7.
2. The display will beep.
3. rSt PS (reset-press start) will appear in the display.
4. Press START to accept the reset.
5. The controls have been reset to the original factory
settings.
Figure 28: Display showing Sabbath failure
Figure 29: Control ready for reset to original settings
Loading ...
Loading ...
Loading ...