Loading ...
Loading ...
Loading ...
34 Setting Oven Controls
To set self clean for a 3 hour clean:
1. Be sure the oven is empty. Removing oven racks is recom-
mended. Make sure door is closed.
2. Press self clean and the default 3 hour clean time will
appear in the display.
IMPORTANT! If another time between 2 and 4 hours is
desired, use the numeric keypad to select the time.
3. Press START to activate self clean.
As soon as self clean becomes active, a motor driven lock
mechanism will begin locking the oven door automatically and a
clocked icon (padlock) will appear in the display. Do not open
the oven door when door icon is displayed (allow 15 seconds
for the lock mechanism to lock the oven). Once the oven door
has locked, CLn will appear in the display indicating self clean
has started.
When Self Clean is finished:
Use caution when opening the oven door after self cleaning.
The oven may still be very hot and can cause burns. To avoid
possible burns stand to the side of the oven when opening the
oven door to allow hot air or steam to escape.
The oven bake and broil elements may appear to have cooled
after they have been turned off. The elements may still be hot
and burns may occur if these elements are touched before they
have cooled.
The Cln message will turn off, and Hot will appear in display
window.
When the door locked icon (padlock) disappears from the
display, the oven may be opened.
When the oven interior has completely cooled, wipe away any
residue or powdered ash with a damp cloth or paper towel.
The kitchen area should be well ventilated. Use an open
window, ventilation fan or exhaust hood during the first self
clean cycle to help eliminate the normal odors associated with
the first self clean cycle.
When the clean time finishes the oven door will remain locked
until the oven has cooled sufficiently. In addition to the clean
time that was programmed, allow about 1 additional hour for the
oven to cool before opening the oven door. The self clean
function will not operate when the oven lockout is active.
Setting Delay Start Self Clean
To start a delay self clean with default clean time of 3 hours and
a start time of 9:00 o’clock:
Be sure the clock is set with the correct time of day, the oven is
empty and all oven racks are removed. Be sure oven door is
completely closed.
1. Press self clean.
2. Press delay start.
3. Using numeric keys enter 9 0 0 for time to start.
Press START.
If it becomes necessary to stop self clean when active:
Press CANCEL. The door locked icon will flash.
If self clean has heated the oven to a high temperature, allow
enough time for the oven to cool. When the door lock icon
disappears from the display, the oven may be opened.
Before restarting self clean, be sure to read important
notes below:
•When self clean is active you may check the amount of
clean time remaining by pressing the self clean key once.
•If your clock is set with the (default) 12 hr display mode, the
delay start for a self clean can only be programmed to start
up to 11 hours and 59 minutes after the time showing in the
display (be sure to set the clock to current time before
programming a delay start). To set a delay start self clean to
begin 12 or more hours (maximum is 23 hours and 59
minutes) after the time of setting, be sure to first set the
control in the 24 Hr display mode.
•If self clean was active and then interrupted by a power
failure or cancelled before the oven was thoroughly
cleaned, it may be necessary to run another self clean
cycle.
•If the oven temperature was high enough when self clean
was interrupted the oven control may not allow another self
clean cycle to be set for up to 4 hours.
Loading ...
Loading ...
Loading ...