Loading ...
Loading ...
Loading ...
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specications without prior notice
19
Form No. Z2751
Rev. 05.26.21
PERLICK NITRO BEVERAGE DISPENSING KIT
Operation/Installation Manual
1. Before opening the keg, ensure the system is
depressurized.
a) Close all valves on the nitrogen tank & air
distributor(s). Refer to Fig. 18 if unsure on what a
closed/open valve looks like.
b) Pull upwards on the pressure relief on the keg for 10
seconds (Fig. 19).
2. Open the keg cover and remove lid from keg.
3. Place the funnel into the top of the keg, then place strainer
into funnel.
a) The strainer will improve the integrity of the system
by disallowing coee grounds to build up.
4. Make sure the keg, funnel, and stainer are clean prior to
use.
5. Slowly pour coee into the stainer.
6. Clean the strainer as needed so that clogging is kept to
a minimum. Repeat these steps with as many tanks as
desired.
7. After the beverage is in the keg and the cover is replaced,
move tank into position and using Operation 6, attach
lines.
FILLING KEG WITH NITRO BREW
Fig. 18
Fig. 19
Pull ring to alleviate pressure.
Open
valve
Closed
valve
Loading ...
Loading ...
Loading ...