Loading ...
Loading ...
Loading ...
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specications without prior notice
12
PERLICK NITRO BEVERAGE DISPENSING KIT
Operation/Installation Manual
1. Determine how many gas lines are needed
a) Two nitrogen lines are needed for nitro-brew coee.
b) One nitrogen line is needed for cold brew .
2. Attach the required amount of red gas tubing to the air
distributor for the application. Compress a worm drive
clamp onto each gas tube. Ensure the tubing is being
compressed to the hose barb.
a) Ensure worm drive clamp doesn’t interfere with
opening/closing valve (Fig. 1).
3. Drive two self-taping screws with a 5/16” hex bit from
the tapping parts bag provided in the kit to attach the air
distributor to the cabinet.
OPERATION #2
–
AIR DISTRIBUTOR INSTALLATION
Fig. 1
Fig. 2
Fig. 3
Ensure worm drive clamp does not interfere
with opening and closing of valve.
Pre-installed gas tubing to regulator
Worm drive
clamp
Up to six attachment points for gas lines for dual
infuser kit (up to ve for single infuser kit)
Loading ...
Loading ...
Loading ...