Loading ...
Loading ...
Loading ...
Oth r tn rmat on
(i_i_ _ _ii_i _ii_ii_i?_ii£,_
Care and Cleaning
After Using the Camcorder
i. Set the Power switch to OFK
2. Open the LCD monitor at least 60L
3. Slide the EJE(TF switch to open the cassette tape holder, then remove the tape.
4. Press the area marked CLOSE to close and lock the cassette tape holder.
5. Close and lock the LCD monitor.
6. Slide the BATFERY RELEASE switch and remove the battery pack.
7. Reattach the lens cap.
Cleaning The Camcorder
i. Clean the exterior, wiping gently with a soft cloth. For heavy clil_, use diluwct, mild
soap and wring the cloth well. '['lien wipe again with a dry cloth.
2. Open the LCD monitor and wipe it gently with a soft, dry cloth. Close it when done.
3. '[k) clean the lens, blow it with air using a blower brush. Wipe gently with lens
cleaning paper.
4.
'['o clean the viewfinder, raise it to the vertical position. '[\_rn the eyepiece
counterclockwise and pull it out. Insert a lens blower or soft cloth into the gap to
clean the interior. Reattach the eyepiece and turn it clockwise until it snaps into
place.
Notes:
Avoid using strong cleaning agents such as alcohol.
Cleaning should be done only after the power supply has been disconnected.
Mold may form if the lens is left dirty.
When using a cleaner or chemically treated cloth, refer to the cautions of each
product.
Chapter 6 81
Loading ...
Loading ...
Loading ...