Loading ...
Loading ...
Loading ...
Other tn rmat on
Video Recording
Wlwn the Power switch is set to _ or [] and the LCD monitor is opened at an angle
of 25 _ or morv, tlw LCD monitor switches on and tlw viewfinder switclws off
automatically to save powvr.
The cassette tape holder can't be opened unless a power supply is attached.
There may be a delay after you slide EJECF until the cassette tape bolder opens. Do
not use fbrce.
The time required to calculate the remaining tape length, and the accuracy of the
calculation, may vaW according to the type of tape used.
The tape remaining time icon is accurate only if the correct tape length has been
selected (seepage 24).
7241_EP2NI)appears when the tape reaches its end, and the power goes off
automatically if left in this condition for 5 minutes.
724IOEkWl)also appears when a tape whose tape is already at its end is loaded.
if the Recording Start/Stop button is pressed after the Record-Standby mode has
continued fbr over 5 minutes, recording may not start immediately.
While shooting, sound is not beard fi-om the speaker.
TBC (Time Base Corrector)
The 773Cicon turns yellow (gray with a camcorder t,quippt+d with a black/whitv
viewfinder) while TBC is working.
TBC does not work during still playback and slmttle search.
The 773C icon turns white while TBC is not operative.
it may take a few seconds befbm TBC actually starts working.
The picture may be distorted if the TBC mode is activated or deactivated at the edit-
in/-out points or when normal playback resumes after still playback or slmttle
search.
if the playback picture is distorted when TBC is set to on, turn off TBC.
Chapter 6 79
Loading ...
Loading ...
Loading ...