Loading ...
Loading ...
Loading ...
TRACKING dial
Power switch
TBC button
Adjusting the Tracking
You may need to eliminate noise bars that appear
on-screen during playback. '[lm default setting is
Auto %acking.
1) Press in the TRACKING dial fbr approximately 2
seconds. (M7 appears).
2) Rotate the 'II_ACKING dial until the noise bars
disappear.
"lk) return to Auto 'Dacking, press in the
TRACKING dial for approximately 2 seconds or
set the Power switch to OFF and then to
again. A7 blinks. (When Auto Tracking finishes,
the icon disappears.)
When noise bars appear during playback, the
camcorder enters the Auto Tracking mode and
A7 appears
Manual Tracking may not work with tapes that
were recorded on other VCRsor camcorders.
Using TBC (Time Base Corrector)
You may need to remove jitter fi-om fluctuating video
signals to deliver a stable picture even with oM
tapes. The default setting is for TI3C to be activated.
To activate fl3e TBC mode, press the TF,C button
during playback for more than 1 second. (TP,C
appears.)
To deactivate TBC, press the TBC button during
playback for more than 1 second. (TP,C disappears.)
46 Chap_ter 4
Loading ...
Loading ...
Loading ...