Loading ...
Loading ...
Loading ...
Connections Setup
DCIN
jack
Turn off the camcorder
i. Set the Power switch to OFF.
2. Close the LCD monit<m
Powering the Camcorder
You can power your camcorder with a batw W or AC
power.
Power switch
CHARGE indicator
Charging the Battery
i. Set the Power switch to OFF.
2.
Make sure the batte_ T is attached to the
camcorder. Hook the top end of the battei T to
the camcorder and push the batte W in until it
locks in place.
Important: If the battery pack is attached in
the wrong position, a malfunction may occu_
Tip
Before extended use, it is
recommended that you prepare
enough battery packs to cover3
times the planned shooting time.
3.
4.
Plug the small end of the power supply into the
DC IN jack on the camcorder and the other end
into an AC outlet. (The CHARGE indicator
blinks.)
When the CHARGE indicator stops blinking but
stays on, charging is finished. Make sure the
Power switch is set to OFF, then unplug the
power supply from the AC outlet and fl-om the
calncorder.
Important: Before detaching the power
source, make sure the camcorder's power _s
turned off. Failure to do so can result in a
camcorder malfunction.
16 Chapter "1
Loading ...
Loading ...
Loading ...