Loading ...
Loading ...
Loading ...
Adjusting Oven Temperature (UPO)
The temperature in the oven is pre-set at the factory. When
first using the oven, be sure to follow recipe times and
temperatures. If you think the oven is cooking too hot or too
cool for the temperature you select, you can adjust the
actual oven temperature to be more or less than what is
displayed. Before adjusting the UPO (User Programmable
Offset), test a recipe by using a temperature setting higher
or lower than the recommended temperature. The baking
results should help you to decide how much of an adjust-
ment is needed.
Note: Do not use thermometers such as those found in
grocery stores to check the temperature settings inside the
oven. These thermometers may display temperatures that
vary between 20 and 40 degrees from the actual tempera-
ture.
To adjust the oven temperature higher:
,
,
,
Press and hold bake key for 6 seconds. UPO 0 will
appear in the display.
To increase the temperature, use the number keys to
enter the desired change. For example, for 30°F, press
3 0. The temperature may be increased as much as
35°F (19°C).
Press start to accept the temperature change and the
display will return to the time of day. Press off to reject
the change if necessary.
To adjust the oven temperature lower:
1. Press bake for 6 seconds. UPO 0 will appear in the
display.
,
To decrease the temperature, use the number keys to
enter the desired change (example -30°1=) 3 0. Then,
press self clean to change from + to -. The tempera-
ture may be decreased as much as 35°F (19°C).
3. Press start to accept the temperature change and the
display will return to the time of day. Press off to reject
the change if necessary.
The UPO can be changed for each oven cavity indepen-
dently. The oven temperature adjustments made with this
feature will not change the self clean temperature or the
broil temperature. The oven temperature adjustments are
permanent and will stay forever in the unit memory unless
you manually change it again. Even a power outage will
not reset these changes. Follow the same procedure
again if you wish to change it to a different setting.
Restoring Factory Control Settings
Your appliance was built with predetermined oven control
settings (default). Over time, users may make changes to
these settings. The following options have settings that can
be modified and may have been changed since the
appliance was new:
• 12 or 24 hour display mode
• Continuous bake or 6 Hour Energy Savings mode
• Silent or audible control
• Oven temperature display (Fahrenheit or Celsius)
• Oven temperature adjustments (offsets)
Note: If you choose to restore factory default settings, all of
the above user preferences will be restored to their original
settings (factory default).
To restore oven control to factory default settings:
1. Press and hold 7 until the acceptance tone sounds
(about 6 seconds)
2. Press start. The control is now reset to default settings.
Loading ...
Loading ...
Loading ...