Loading ...
Loading ...
Loading ...
Setting the Clock
The set clock control is used to set the clock. The clock may
be set for 12 or 24 hour display operation. The clock is
preset at the factory for 12 hour display. When the oven is
first plugged in, or when the power supply to the oven has
been interrupted, the time in the display will flash.
To set the clock (example: setting time for 1:30):
1. Press set clock. CLO will appear in the display.
2. Press 1 3 0 on the numeric keypad to set the time of
day to 1:30. CLO will stay in the display.
3. Press start. CLO will disappear and the clock will start.
Setting 12 or 24 Hour Time of Day Display
1. Press and hold set clock for 6 seconds. CLO will
appear in the display.
2. Continue holding the key until 12Hr dAY or 24Hr dAY
appears in the display and the control beeps once.
3. Press self clean to switch between the 12 and 24 hour
time of day display. The display will show either 12Hr
dAY or 24Hr dAY.
4. Press start to accept the change or press off to reject
the change.
5. Reset the correct time as described in this section. If the
24 hour time of day mode was chosen, the clock will
display time from 0:00 through 23:59 hours.
Temperature Display (Fahrenheit/Celsius)
The broil and self clean keys control the Fahrenheit (°F) or
Celsius (°C) temperature display modes. The oven control
can be programmed to display temperatures in °F or °C.
The oven is preset at the factory to display in °F.
To change display from °F to °C or °C to °F
.
2.
.
.
.
To check if the display is set for °F or °C, press broil.
If 550 ° appears, the display is set to show temperatures
in Fahrenheit. If 288 ° appears, the display is set to show
temperatures in Celsius.
If the preferred temperature mode is in the display,
press off to keep the setting or wait 6 seconds and the
control will return to display the time of day.
To change the setting press and hold broil for about 6
seconds until F or C appears in the display.
Press self clean to switch between °F or °C display
modes.
6. Press start to accept the change or press off to reject
the change.
Setting Continuous Bake or 6 Hour Energy Saving
The timer on-off and self clean keys are used to set the
continuous bake or 6 Hour Energy saving features. The
oven control has a factory preset 6 hour energy saving
feature that shuts off the oven if the oven control is left on
for more than 6 hours. The oven can be programmed to
override this feature for continuous baking.
To set the control for continuous bake or 6 hour energy
saving:
1. Press and hold timer on-off for 6 seconds. After 6
seconds 6Hr OFF or StAY On will appear in the display
and the control will beep once.
2. Press self clean to switch between the 6 hour energy
saving and continuous bake features.
3. Press start to accept the change (display will return to
time of day) or press off to reject the change.
6Hr OFF indicates the control is set for the 6 hour energy
saving mode. StAY On indicates the control is set for the
continuous bake feature.
Loading ...
Loading ...
Loading ...