Loading ...
Loading ...
Loading ...
DS-2TD2xxx-xxxx/xx Thermal and Optical Bi-Spectrum Network Camera User Manual
UM DS-2TD2xx-xxxx/xx Thermal 072020NA 66
12.9 Time and Date
You can configure the device time and date f by configuring the time zone, time synchronization, and
Daylight Saving Time (DST).
12.9.1 Synchronize Time Manually
1. Go to Configuration → System → System Settings → Time Settings.
2. Select Time Zone.
3. Click Manual Time Sync.
4. Choose one time synchronization method.
• Select Set Time, and manually input or select the date and time from the pop-up calendar.
• Check Sync. with computer time to synchronize the time of the device with that of the local PC.
5. Click Save.
12.9.2 Set NTP Server
You can use an NTP server when an accurate and reliable time source is required.
Before You Start
Set up an NTP server or obtain NTP server information.
1. Go to Configuration → System → System Settings → Time Settings.
2. Select Time Zone.
3. Click NTP.
4. Set Server Address, NTP Port, and Interval.
Server Address is NTP server IP address.
5. Click Test to test the server connection.
6. Click Save.
12.9.3 Set DST
If the region where the device is located adopts Daylight Saving Time (DST), you can set this function.
1. Go to Configuration → System → System Settings → DST.
2. Check Enable DST.
3. Select Start Time, End Time, and DST Bias.
Loading ...
Loading ...
Loading ...