Loading ...
Loading ...
Loading ...
DS-2TD2xxx-xxxx/xx Thermal and Optical Bi-Spectrum Network Camera User Manual
UM DS-2TD2xx-xxxx/xx Thermal 072020NA 15
1) Display Temperature Info.
2) Select Yes to display temperature information on live view.
3) Enable Rules to display the rules information on live view.
2. Click Save.
3. Go to Configuration → Temperature Measurement → Basic Settings to configure parameters.
• Enable Temperature Measurement: Check to enable temperature measurement function.
• Enable Color-Temperature: Check to display Temperature-Color Ruler in live view.
• Display Temperature Info. on Stream: Check to display temperature information on the stream.
• Display Temperature in Optical Channel: Check to display thermal channel temperature information
in the optical channel.
• Display Max./Min./Average Temperature: Check to display maximum/minimum/average
temperature information on live view when the temperature measurement rule is line or area.
• Position of Thermometry Info: Select the position of temperature information shown on live view.
• Near Target: Display the information beside the temperature measurement rule.
• Top Left: Display the information on the top left of screen.
• Add Original Data on Capture: Check to add data on alarm triggered capture of thermal channel.
• Add Original Data on Stream: Check to add original data on thermal view.
• Data Refresh Interval: Temperature information refresh interval.
• Unit: Display temperature in Celsius (°C)/Fahrenheit (°F)/Kelvin (K).
• Temperature Range: Select the temperature measurement range.
• Version: View the current algorithm version.
4. Click Save.
Loading ...
Loading ...
Loading ...