Loading ...
Loading ...
Loading ...
DS-2TD2xxx-xxxx/xx Thermal and Optical Bi-Spectrum Network Camera User Manual
UM DS-2TD2xx-xxxx/xx Thermal 072020NA 28
Chapter 6 Event and Alarm
This section introduces event configurations. The device reequires certain responses to triggered alarms.
6.1 Set Motion Detection
It helps to detect moving objects in the detection region and trigger linkage actions.
1. Go to Configuration → Event → Basic Event → Motion Detection.
2. Select the channel no.
3. Check Enable Motion Detection.
4. (Optional): Highlight to display a moving object in the image in green.
1) Check Enable Dynamic Analysis for Motion.
2) Go to Configuration → Local.
3) Set Rules to Enable.
5. Select Configuration Mode, and set rule region and rule parameters.
• For normal mode information, see Normal Mode.
• For expert mode information, see Expert Mode.
6. Set the arming schedule and linkage methods. For information about arming schedule settings, see
Set Arming Schedule. For information about linkage methods, see Linkage Method Settings.
7. Click Save.
6.1.1 Normal Mode
You can set motion detection parameters according to the device default parameters.
1. Select normal mode in Configuration.
2. Set the normal mode sensitivity. The higher the value of sensitivity, the more sensitive the motion
detection. If the sensitivity is set to 0, motion detection and dynamic analysis do not take effect.
3. Click Draw Area. Click and drag the mouse on the live video, then release the mouse to finish drawing
one area.
• Stop Drawing: Stop drawing one area.
• Clear All: Clear all the areas.
Loading ...
Loading ...
Loading ...