Loading ...
Loading ...
Loading ...
DS-2TD2xxx-xxxx/xx Thermal and Optical Bi-Spectrum Network Camera User Manual
UM DS-2TD2xx-xxxx/xx Thermal 072020NA 52
Chapter 10 Video Recording and Picture Capture
This section introduces capturing video clips and snapshots, playback, and downloading captured files.
10.1 Storage Settings
This part introduces the configuration of several common storage paths.
10.1.1 Set Memory Card
If you choose to store the files to a memory card, insert and format the memory card in advance.
Before You Start
Insert the memory card into the camera. For detailed installation, see
Quick Start Guide
of the camera.
1. Go to the storage management setting page: Configuration → Storage → Storage Management → HDD
Management.
2. Select the memory card, and click Format to start initializing the memory card.
The memory card Status turns to Normal from Uninitialized, which means the memory card can be used
normally.
3. (Optional): Define the memory card Quota. Input the quota percentage for different contents according
to your needs.
4. Click Save.
10.1.2 Set NAS
Use a network server as a network disk to store the record files, captured images, etc.
Before You Start
Get the IP address of the network disk.
1. Go to the NAS setting page: Configuration → Storage → Storage Management → Net HDD.
2. Click HDD No. Select Mounting Type and set parameters for the disk.
• Server Address: The IP address of the network disk.
• File Path: The saving path of network disk files.
• User Name and Password: The user name and password of the net HDD.
3. Click Test to check whether the network disk is available.
4. Click Save.
10.1.3 Set FTP
You can configure the FTP server to save images that are captured by events or a timed snapshot task.
Loading ...
Loading ...
Loading ...