Loading ...
Loading ...
Loading ...
DS-2TD2xxx-xxxx/xx Thermal and Optical Bi-Spectrum Network Camera User Manual
UM DS-2TD2xx-xxxx/xx Thermal 072020NA 38
1. Click to start full screen mode.
2. Press ESC button to exit.
8.1.7 Light
1. Click to turn on or turn off the illuminator.
8.1.8 Wiper
For devices that have a wiper, you can control the wiper via a Web browser.
1. Click on the live view page. The wiper wipes the window one time.
8.1.9 Lens Initialization
Lens initialization is used on devices equipped with a motorized lens. This function can reset the lens
when a long time zoom or focus results in a blurred image. This function varies by models.
1. Click to operate lens initialization.
8.1.10 Auxiliary Focus
1. Click to realize automatic focus. This function is subject to the actual device model.
8.1.11 Quick Set Live View
Quick setup of PTZ, display settings, OSD, video/audio, and VCA resource settings on the live view page.
1. Click to show the quick setup page.
2. Set PTZ, display settings, OSD, video/audio, and VCA resource parameters.
• For PTZ settings, see Lens Parameters Adjustment .
• For display settings, see Display Settings.
• For OSD settings, see OSD.
• For audio and video settings, see Video and Audio.
• For VCA settings, see Fire Source Detection, Temperature Measurement, and Behavior Analysis.
The function is supported only by certain models.
8.1.12 Lens Parameters Adjustment
Used to adjust the lens focus, zoom, and iris.
• Zoom
- Click , and the lens zooms in.
Loading ...
Loading ...
Loading ...