Hikvision DS-2TD2637-35/P DeepinView Outdoor Thermal Camera

User Manual - Page 35

For DS-2TD2637-35/P.

PDF File Manual, 72 pages, Read Online | Download pdf file

DS-2TD2637-35/P photo
Loading ...
Loading ...
Loading ...
DS-2TD2xxx-xxxx/xx Thermal and Optical Bi-Spectrum Network Camera User Manual
UM DS-2TD2xx-xxxx/xx Thermal 072020NA 35
TCP/IP for DNS settings.
1. Go to the e-mail settings page: Configuration Network Advanced Settings Email.
2. Set e-mail parameters.
1) Input the sender’s e-mail information, including the Sender's Address, SMTP Server, and SMTP Port.
2) (Optional): If your e-mail server requires authentication, check Authentication and input your user
name and password to log in to the server.
3) Set the E-mail Encryption.
- When you select SSL or TLS, and disable STARTTLS, e-mails are sent after being encrypted by
SSL or TLS. The SMTP port should be set as 465.
- When you select SSL or TLS and Enable STARTTLS, e-mails are sent after being encrypted by
STARTTLS, and the SMTP port should be set as 25.
If you want to use STARTTLS, make sure that the protocol is supported by your e-mail
server. If you check Enable STARTTLS and the protocol is not supported by your e-mail
server, your e-mail will be sent with no encryption.
4) (Optional): To receive notifications with alarm pictures, check Attached Image. The notification e-
mail has three attached event alarm pictures with configurable image capturing interval.
5) Input the receiver’s information, including the receiver’s name and address.
6) Click Test to see if the function is configured properly.
3. Click Save.
7.2.4 Notify Surveillance Center
Check Notify Surveillance Center to have the alarm information uploaded to the surveillance center when
an alarm event is detected.
7.2.5 Trigger Recording
Check Trigger Recording, and the device records the video about the detected alarm event.
For devices with more than one camera channel, you can set one or more channel recordings if needed.
For recording settings, see Video Recording and Picture Capture.
7.2.6 Set Audible Alarm Output
For devices that support an audible warning as a linkage method, options are open to configure audible
alarm parameters.
This function is supported only by certain camera models.
Loading ...
Loading ...
Loading ...