Loading ...
Loading ...
Loading ...
DS-2TD2xxx-xxxx/xx Thermal and Optical Bi-Spectrum Network Camera User Manual
UM DS-2TD2xx-xxxx/xx Thermal 072020NA 54
This section introduces manual and scheduled recording, playback, and downloading recorded files.
10.2.1 Record Automatically
This function can record video automatically during configured time periods.
Before You Start
Select Trigger Recording in event settings for each record type except Continuous. See Event and Alarm.
1. Go to Configuration → Storage → Schedule Settings → Record Schedule.
2. Select channel no.
3. Check Enable.
4. Select a record type.
The record type varies by model.
• Continuous: The video will be recorded continuously according to the schedule.
• Motion: When motion detection is enabled and trigger recording is selected as the linkage method,
object movement is recorded.
• Alarm: When alarm input is enabled and trigger recording is selected as the linkage method, the
video is recorded after receiving alarm signal from an external alarm input device.
• Motion | Alarm: Video is recorded when motion is detected or alarm signal is received from an
external alarm input device.
• Motion & Alarm: Video is recorded only when motion is detected and an alarm signal is received
from an external alarm input device.
• Event: Video is recorded when a configured event is detected.
5. Set schedule for the selected record type. See Set Arming Schedule for setting operation.
6. Click Advanced to set advanced settings.
• Overwrite: Enable to overwrite video records when the storage space is full. Otherwise the camera
cannot record new videos.
• Pre-record: The time period you set to record before the scheduled time.
• Post-record: The time period you set to stop recording after the scheduled time.
• Stream Type: Select the stream type for recording.
When you select the stream type with a higher bitrate, the actual time of the pre-record
and post-record may be less than the set value.
Loading ...
Loading ...
Loading ...