Loading ...
Loading ...
Loading ...
DS-2TD2xxx-xxxx/xx Thermal and Optical Bi-Spectrum Network Camera User Manual
UM DS-2TD2xx-xxxx/xx Thermal 072020NA 53
Before You Start
Get the FTP server address.
1. Go to Configuration → Network → Advanced Settings → FTP.
2. Configure FTP settings.
• Server Address and Port: The FTP server address and corresponding port.
• User Name and Password: The FTP user should have permission to upload pictures.
If the FTP server supports picture uploading by anonymous users, check Anonymous to hide your
device information during uploading.
• Directory Structure: The saving path of snapshots in the FTP server.
3. Click Upload Picture to enable uploading snapshots to the FTP server.
4. Click Test to verify the FTP server.
5. Click Save.
10.1.4 Set Cloud Storage
It helps to upload the captured pictures and data to the cloud. The platform requests pictures directly
from the cloud for picture and analysis. The function is supported only by certain models.
CAUTION: If cloud storage is enabled, pictures are preferentially stored in the cloud storage server.
1. Go to Configuration → Storage → Storage Management → Cloud Storage.
2. Check Enable Cloud Storage.
3. Set basic parameters.
• Protocol Version: The protocol version of the cloud storage server.
• Server IP: The IP address of the cloud storage server. It supports IPv4 address.
• Serve Port: The port of the cloud storage server. 6001 is the default port, and you are not
recommended to edit it.
• User Name and Password: The user name and password of the cloud storage server.
• Picture Storage Pool ID: The ID of the picture storage region in the cloud storage server. Make sure
storage pool ID and the storage region ID are the same.
4. Click Test to test the configured settings.
5. Click Save.
10.2 Video Recording
Loading ...
Loading ...
Loading ...