Loading ...
Loading ...
Loading ...
!ii;iii!iiii! !i!i ;;iiiiiiiiiii iiiiiiii!iii!i!21Li iill ilili :ililil
• page
No sound. Incorrect input or output cable 16
connections.
Ifa DVI-HDMI cable is used to
connect the unit with an external
component, then it is necessary to
use an audio input jack t_r a
different input to output audio.
Speaker connections are not
secure.
Connect the cables properly. If the problem
persists, the cables may be detective.
Display the HDMI Input Option menu for
the connected cable, select "Audio In," and
select the jack to use t_r audio input.
38
Secure the connections. 12
The HDMI components connected Connect HDMI components that support the 38
to the unit do not support the HDCP copy protection standards.
HDCP copy protection standards.
The audio input into the device is In the Setup menu, set the HDMI Audio Out 45
set to playback through the TV. ("Sound Setup" _'. "HDMI Audio Out") to
other than "TV."
No appropriate input source has Select an appropriate input source with 25
been selected. _lnput selector (on the remote control).
The volume is turned clown or Turn up the volume.
muted.
Signals that this unit cannot Use an input source that has signals that can
reproduce are being input from a be reproduced on this unit.
source component, such as a CD-
ROM.
No picture. A video jack (ex. Video input > Use video jacks of the same type (ex. Video 14
HDMI output) type different to the input _'. Video output) to connect to the TV.
input vkteo is being used to try to
display content on the TV.
An appropriate video input is not Select an appropriate video input on the TV.
selected on the TV.
Problem . Cause Remedy See
• page
The speaker is malfunctioning.
Check the Speaker indicators on
the front panel display. If the
corresponding indicator lights up,
connect another speaker and check
if sound is output.
The playback component or
speakers are not connected
properly.
Output from that speaker is
disabled.
No sound is output
from a specific
speaker.
Only the center
speaker outputs
substantial sound.
The volume of that speaker is set
to the minimum in "Speaker
Setup" in the Setup menu.
(If hardly any sound comes from
one channel)
Speaker output balance is not set
correctly.
Sound may not be output from
certain channels, depending on the
input source or sound field
program.
When a nlouaural source sound
fiekt program is applied, t_r some
surround decoders, sound from all
channels is output from the center
speaker.
If sound is not output, the unit may be
malflmctioning.
Connect the cables properly. If the problem
persists, the cables may be defective.
Check the Speaker indicators on the front
panel display. If the corresponding indicator
is turned off, try the t_llowing.
1) Change to a different input source.
2) With the selected sound field program,
sound is not output from that speaker. Select
another sound fiekt program.
3) "None" may have been selected for that
speaker on this unit. Display "Speaker
Setup" in the Setup menu. and set respective
parameters to enable output from that
speaker ("Speaker Setup" >"Config").
Display "Speaker Setup" in the Setup menu
and adjust the volume ("Speaker Setup" >
"Level").
Balance the volume of each speaker from
"Level" in the Setup menu ("Speaker Setup"
> "Level").
Try another sound field program.
Try another sound field program.
12,16
7,41
42
42
26
26
En 56
Loading ...
Loading ...
Loading ...