Loading ...
Loading ...
Loading ...
iiiiiiiiiiii!i i
Remove approximately lOmm of insulation from the
ends of the speaker cables, and twist the bare wires
of the cables together firmly so that they will not
cause short circuits.
Loosen the speaker terminals.
Insert the bare wire of the speaker cable into the gap
on the side of the terminal.
Tighten the terminal.
Connecting the banana plug (Except U.K., Europe,
Asia and Korea models)
Tighten the knob, and then insert the banana plug into the end of
the terminal.
Banana plug
Press the tab on the speaker terminal down.
Insert the speaker cable end into the terminal.
Lift the tab to fix the speaker cable in place.
Connect the subwoofer input jack to the
SUBWOOFER jack on this unit with an audio pin
cable.
Set the subwoofer volume as follows.
Volume: Set to approximately hall volume (or slightly less than
half).
Crossover flequency (if available): Set to maximum.
Subwoofer examples
En 12
Loading ...
Loading ...
Loading ...