Loading ...
Loading ...
Loading ...
ManagessettingsYetspeakers
Speaker Setup submenu
Manually manages speaker configuration, such as
speaker size (sound production capacity), and bass
audio processing.
Manually adjusts the volume of each speaker.
Manually adjusts the output of each speaker based on
distance to the listening point.
Selects an equalizer to adjust speaker output
characteristics.
Generates test tones.
Adjusts the output characteristics of the speakers based on
manually set parameters.
In the Config submenu, you can select the speaker size
characteristic (Large or Small). Select the size (sound
reproduction capacity) that matches your speakers.
l Woofer diameter
• 16 cm or larger _ Large
• 16 cm or smaller _ Small
When speaker size is set to "Small," low-frequency components
of the speakers that you configured are produced from the
subwoofer (or from the front speakers if there is no subwoofer).
'.iii]L.!i:::,bJ,:::,,:::,'!:',!!!'!....
Confirms the subwoofer.
Select this when you have a subwoofer connected.
During playback, the subwoofer will produce audio
from the LFE (low-frequency effect) channel and bass
audio from other channels.
Select this when you do not have a subwoofer
connected. The front speakers will produce audio
from the LFE (low-frequency effect) channel and bass
frequency audio from other channels.
i:::",......... ,.....i.
Selects the size (sound reproduction capacity) of the front
speakers. _52
Select this tUr small speakers. The subwoofer will
produce front channel low-frequency
components. _3
Select this for large speakers. The front speakers will
produce all of the front channel frequency
components.
ill}_!!!,!"!"i:.._!!!,!....
Selects the size of the center speakers.
Select this when there is no center speaker. The front
speakers will produce center channel audio.
Select this when a small center speaker is connected.
Select this when a large center speaker is connected.
:iii;u!,= LR
Selects the size of the surround speakers.
Select this when no surround speakers are connected.
The front speakers will produce surround channel
audio signals.
Select this when the surround speakers are small.
Select this when the surround speakers are large.
"{bJS : Enabling the "Extra Bass" setting allows both the subwoofer and the front
speakers to produce bass audio.
"ibj2 : When "Subwoolizr" is set to "None"' you can only choose "Large." lfthe l?ont
speaker setting is "Small" and you change "Subwoofer" to "None," it will
automatically change to "Large."
"{bJ3 : Enabling the "Crossover" setling allows you lo set lhe fi'equency components
of audio signals transmilled h'om the fi'ont speakers to the subwoofer.
En 41
Loading ...
Loading ...
Loading ...