Loading ...
Loading ...
Loading ...
_ Cursor 2x/v /<1/E>
_ ENTEF_
RETURN
_P_ Use _Cursor _ / v" to select the speaker
(subwoofer) you want to configure, and
then use _Cursor <1/ > to select speaker
status and size.
i!!! ii !ii!ii!iiii!iiii
'.!!!;L4l:)b.h:::.:::,']::',iii'i""Sets the subwoofer status. Yes!None
{::'i"'oi"!'i:.. Selects the size (sound Small/Large
reproduction capacity) of the
front speakers.
C:,ii_i'Ti:..,ii_i"" Selects the size of the center None/Small/
speakers. Choose "None" if Large
you do not have a center
speaker connected.
'.!!!;_.._i""== i....1:;?. Selects the size of the surround None/Small/
speakers. Choose "None" if Large
you do not have surround
speakers connected.
C:i'o:iii.:il;.o'...',iil,i'" Audio with a frequency below 40Hz to
this limit will be output from 200Hz
the subwoofer or the front
speakers.
'.:::,b.IN'=:'.l"'{"i._ii!:ii_.eSwitches the phase of the Normal/
subwoofer. Reverse
E:=.::'i:..i"'.ii_l!!!l._ii!:ii_.:ii_.Selects whether to play front On/Off
channel low-frequency
components through either of
the front speakers or the
subwoofer (Off), or through
both the subwoofer and front
speakers (On).
• Whether or not you set "Crossover," "SWFR Phase,"
and "Extra Bass" is optional. Check how the effects
sound and then configure them to your liking.
• Use the following as a guide when setting speaker
sizes.
Woofer diameter
• 16 cm or larger _ Large
• 16 cm or smaller _ Small
When speaker size is set to "Small," low-frequency
components of the speakers you configured are
produced from the subwoofer (or from the front
speakers if there is no subwoofer).
When you have completed the settings for one speaker,
repeat the same procedure for all speakers to complete
settings.
Press _FiETURN when setting is complete.
Return to the previous menu.
This completes step 2.
STEP3: Set the distance from the
Press _Cursor v to display "Distance" and
press _ENTEFL
Press _Cursor _ / _7 to select the speaker
that you want to configure, and press
_Cursor <1/ > to change the distance.
If necessary, you can change the setting units under
"Unit."
l...li."_:I."I:.. Switches between setting feet (ft) /
units (feet / meters), meters (m)
F::i"'c:,i"_'i:..{.... Front speaker L 1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
F::i"',:::,i"_'i:..1:;?. Front speaker R 1.0 ft to 80.0 t't
(0.30 m to 24.0 m)
(_:,ii?i"_'i:..ei"" Center speaker 1.0 ft to 80.0 t't
(0.30 m to 24.0 m)
'.!!;_..ai"'==l.... Surround speaker L 1.0 ft to 80.0 t't
(0.30 m to 24.0 m)
'.!!;i..ai.".==1:;?. Surround speaker R 1.0 ft to 80.0 t't
(0.30 m to 24.0 m)
'.:::,b._{"1'=:'. Subwoofer 1.0 t't to 80.0 t't
(0.30 m to 24.0 m)
When you have completed the settings for one speaker,
repeat the same procedure for all speakers to complete
settings.
Press _FiETURN when setting is complete.
Return to the previous menu.
This completes step 3.
En 23
Loading ...
Loading ...
Loading ...