Loading ...
Loading ...
Loading ...
vdeo and sudo
Input source: HDMII-4, AVI-2
Combines video from HDMI or AV input sources with analog/
digital audio inputs in situations such as:
- an external device is connected with an HDM[ cable but cannot
transmit audio through HDMI
- an external device with component video output and analog audio
output (such as certain game consoles) are connected to the
system
Inputs that change the audio source
Assignable audio input jacks
To change assignments, select an input source (HDMI1-4 or AVl-2)
as the video input first, and then select audio input jacks in this
menu.
Set as follows according on the desired combination of audio input
jacks.
Optical digital audio Select AVI or AV4. Connect the external component
input audio cable to the optical jack for the selected input.
Coaxial digital audio Select AV2 or AV3. Connect the external component
input audio cable to the coaxial jack for the selected input.
Analog audio input Select one of AV5, AUDIOI, or AUDIO2. Connect
the external component audio cable to the audio jack
for the selected input.
• For details of settings, refer to "Receiving audio fiom other input
sources" (_p. 16) and "Component connections to analog audio
output devices" (_).
• To return audio inputs to their previous settings, display this item
again, and select the original input jack.
©spayn 9 _sfo_xsa_ on on sud oiv dee
Input source: HDMll-4, AVI-4
Displays information on digital audio and video signals on the
front panel display. You can display the signal information by
pressing _ENTEN on the menu item and using _Cursor _ / _7.
Menu item
Information
Audio information
Format of audio signals.
The number of input signal channels (front/surround/
LFE).
For example, if input signal channels are 3 front
channels, 2 surrounds and LFE, "3/2/0.1" is
displayed.
The sampling frequency of analog-to-digital
The bit rate of input signal per second.
Video information
Format and resolution of video input signal.
Format and resolution of video output signal.
Error messages about HDMI signals and components.
Error message
....................i"4i")l":F:)i:::'i'_'i"'l"li"" HDCP authentication failed.
The number of connected HDMI
components is over the limit.
• "No Signal" is displayed when no signals are being received,
and "---" is displayed if this unit cannot recognize the incoming
signal.
• The bit rate may vaU during playback.
En38
Loading ...
Loading ...
Loading ...