Loading ...
Loading ...
Loading ...
Registering remote control codes
for external component operations
The following section describes how to register remote
control code using an example of the registration of the
remote control codes of a Yamaha BD player connected
to HDMI2 jack.
• Perfotln each of the %llowing steps within 1 minute.
Settings will be automatically stopped if more than 1
minute passes since the last operation. To reset, repeat
IYomstep 2.
• Remote control code of an external component cannot
be set fiom the name or model number era unit. Use
"Remote Control Code Search" in the CD-ROM to
search the available remote control codes IYomthe
category or manufacturer of external components.
• If multiple remote control codes exist, first set the first
code in the list, if it does not work then try the other
codes.
#_ Press @HDMI2 on the remote control to
£_ switch the input source to HDMI2. _2,1
Perform the following steps to register the selected
input source here to the remote control code.
Enter a remote control code "2064" using
_Numeric keys. kl,f_
Once the remote control code is registered successfully
the remote control will blink twice.
Registration successful: blinks twice
Registration failed: blinks 6 times
5
To switch between BD player linked to
scene selections, press _SCENE and at the
same time press _HDMt2 and hold it for
approximately 3 seconds.
Then you can operate the external components by
switching the input source to HDMI2, or selecting
HDMI2 in the registered scene.
Same steps for operating other external components,
press [di$CENE and at the same time press the input
source key selected in step 3 and hold it for
approximately 3 seconds.
Use "Remote Control Code Search" in the CD-
ROM to search the available remote control
codes from the category or manufacturer of
external components.
"2064" can be used for a Yamaha BD player.
If the registration fails, repeat the step 2.
In case of an external component with multiple remote
control codes, the other remote control codes may be
supported. Repeat tYomstep 2 with the other remote
control codes.
@ HDNI2
_SCENE
Numeric keys
_TV centrel keys
CODE SET
Press _CODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
"{bJ_ : When you want 1o register a remole comrol code Io the _TV
contrN keys, press _) (_TV control keys) in step 3.
"{bJ5? When you want 1o register a remote control code 1o the _TV
control keys, enter Ihe TV remole control code in slep 4.
En 51
Loading ...
Loading ...
Loading ...