Loading ...
Loading ...
Loading ...
®
You can operate an external component such as TV and DVD player with the remote control of this unit by setting the code for external component (remote control code).
The remote control code can be set for each input source. Individual setting allows you to switch external components seamlessly depending on the selected input source.
Selecting input source connected to DVD
player
Keys connecting external
Default remote control code
_SOURCE (b
[_ Input selector
[] SETUP
[_ Cursor z&/v/<I It>
_ENTER
[_ RETURN
Externam component
operation keys
[_ DISPLAY"
Numeric keys
_TV control keys
_INPUT
[_ MUTE
TV VOL +/-
[_ TV C H +/o
!_7iOPTION
[]
Playback/Stop
DVD player
CD player
Selecting input source connected to CD
player
iv)
Playback/Stop
DVD player
CD player
If you are unable to operate this unit after operating an
external component, press []SETUP or _iOPTION
and then try operating the remote control again.
The remote control keys for controlling external
components are available only when the external
components have corresponding control keys.
_SOURCE (b
Switches an external component on and off.
_Cursor, [_ENTER, _RETURN
Operates the menus of external components.
_D_SPLAY
Switches an external component display.
_Externat component operation keys
Functions as a recording or playback key of an external
component, or a menu display key.
_Numeric keys
Functions as numeric keys of an external component.
_TV control keys _
iii @N @@!!
Switches video inputs of TV
Mutes TV volume temporarily.
Controls the volume of TV
Switches TV channels.
Turns on and off TV
The following remote control codes are assigned to input
sources as factory default settings. For a complete list of
available remote control codes, please refer to "Remote
Control Code Search" in the CD-ROM.
HDMI1 Blu-ray Yamaha 2064
player/
recorder
HDMI2
HDMI3
HDMI4
AV1
AV2
AV3 CD player Yamaha 5095
AV4
AV5
AUDIO1
AUDIO2
V-AUX
A/B _2
DOCK DOCK Yamaha 5089
TUNER Tuner Yamaha 5085
"{bJ_ : You can register remote control codes lor exlernal componenls to
(_nput selector and remote control codes for TVs in _(_
gv control keys).
To regisler a TV remote control code to @mnput selector:
You can use the _Cursor, _Numeric keys, and _TV
control keys to control a TV you have registered.
To register a remote control code for a device other than a TV to
@Input semector:
You can use the _Cursor and _Numeric keys etc to control
external components, and the _TV control keys to control
TVs registered in D0).
"{bJ2 : Use A/B for external component operations only. Set these keys to
remote control codes if you want to perform external component
operations without linking to input source selection of this unit.
For example, it may be convenient to assign remote control codes
for devices such as TVs.
En 50
Loading ...
Loading ...
Loading ...