Loading ...
Loading ...
Loading ...
[9_SETUP
[_ Cursor A/v/<3/E>
[_] ENTER
RETURN
STEP4: Playbagk a test tone
8 Press _Cursor _7 repeatedly to display
"Test Tone" and press _ENTER.
Use _Cursor 4 / L> to select "On."
A test tone plays back as soon as you select "On."
The test tone plays back in a clockwise fashion, as
follows.
Front L Front R
Center
====_ ====_
Subwoofer
Surround L
\
Surround R
2 Check that the test tone is playing back
and press _RETURN.
Return to the previous menu.
This completes step 4.
STEP5: Adjust the volume
_'_ Press _Cursor _ repeatedly to display
£_ "Level" and press _ENTER.
4 Use _Cursor _ / _7to switch the speaker
that is outputting the test tone, looking
for speakers with a different volume level
to the others.
The fiont panel display shows the speaker that is
outputting the test tone. ;_;_
]:::i.... Front speaker L
,m:::',... Front speaker R
C Center speaker
'.!!;1.... Surround speaker L
'.!!;1:;?. Surround speaker R
'.:::,b.l{"1',:', Subwoofer
If you find a speaker with a different
volume level to the others, use _Cursor
q / > to adjust the volume. Use Front
speaker L or R as a default when
adjusting volumes.
To raise the volume: Press _Cursor !>.
To lower the volume: Press _Cursor <1.
15
18
lg
Repeat steps 14 and 15 to adjust the
volume balance for all speakers to your
preference.
Press _RETURN when setting is
complete.
Return to the previous menu.
This completes step 5.
Repeat procedures 10-12 (step 4) to stop
playback of the test tone.
Once you have completed all settings,
press _SETUP to close the Setup menu.
"{bJ_ : Only speakers configured for use in procedure 5 output the test
tone.
En 24
Loading ...
Loading ...
Loading ...