Loading ...
Loading ...
Loading ...
Avoiding crossing remote control
signals when using multiple
Yamaharegeivers
The remote control of the unit can only receive signals
from a receiver which has an identical ID (remote
control ID). When using multiple Yamaha AV receivers,
you can set each remote control with a unique remote
control ID for its corresponding receiver.
On the contrary, if you are setting the same remote
control ID for all receivers, you can use one remote
control to operate 2 receivers.
Receives the remote control signals set in
IDI.
Receives the remote control signals set in
ID2.
ID1 is set for both remote control and receiver by
default. To avoid crossing remote control, change the
remote control ID for both remote control and
receiver.
• To change the remote control ID
Perform each of the following steps within 1 minute.
Settings will be automatically stopped if more than
1 minute passes since the last operation. To reset,
repeat from step 1.
Press I_!CODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
Press _qlSETUP on the remote control.
Enter the desired remote control ID code.
To switch to ID1 :
Enter "5019" using [ii21]Numerie keys.
To switch to ID2:
Enter "5020" using Ii_Numeric keys.
Once the remote control code is registered
successfully the remote control will blink twice.
Registration successful: blinks twice
Registration failed: blinks 6 times
In#iafizing various settings Yorthis
Initializes various settings stored in this unit and sets it
back to default.
Select the items to be initialized from the following.
Initializes all parameters for the sound
field programs.
Resets this unit to default factory settings.
Does not initialize.
SETUP
_j Numeric keys
CODE SET
• If setup l:ails, repeat flom step 1.
• Returns to IDI alter the remote control code is
initialized (_).
En 54
Loading ...
Loading ...
Loading ...