Loading ...
Loading ...
Loading ...
2ch Stereo only
Automatically bypasses the DSP circuit and tone control circuit
depending on the condition of tone control etc., when an analog
sound source is played back. You can enjoy a higher quality sound.
Outputs sound by bypassing the DSP circuit and tone
control circuit when both tone controls of "Bass" and
"Treble" are set to 0dB.
Does not bypass the DSP circuit and tone control
circuit.
5ch Stereo only
Straight Enhancer/5ch Enhancer only
Adjusts the effect level of the compressed music enhancer mode.
Standard effect.
Sets when the high-frequency signals of the source are
emphasized excessively.
I-]rl PLII Music only
Adjusts the soundscape of the front sound field. Sends front left/
right channels sounds to the surround speakers as well as the front
speakers for a wraparound effect.
Adjusts the difference in level between the front sound field and
the surround sound field. You can adjust the difference in level
created by the software being played back to obtain the preferred
sound balance.
The surround sound gets stronger as you make the value more
negative, and the front sound gets stronger as you make the value
more positive.
_:u_ _ ]1-3toSTDto+3
! ._ !i]1STD<Staudard,
Adjusts the center channel volume. _,_
@NIl0to 100G
Adjusts the volume of the surround L channel. _"_
0to
Spreads the center channel sound to the front left and right
speakers to suit your needs or preferences. Set this parameter to 0
for outputting the center sound from the center speaker only, or to 7
for outputting it from the front left/right speaker only.
Adjusts the volume of the surround R channel. _"_
tl0to
"{bJ_ : Not displayed when speakers are set to be inaclive.
En 49
Loading ...
Loading ...
Loading ...