Loading ...
Loading ...
Loading ...
iiiiiiiiiiii!i i
iiii!i!iiiii iiii!i!iiiii
gonnecHngspeakers
5.1-channel speaker layout (5 speakers + subwoofer)
Frontspeaker R
Front speaker L
Subwoofer
This unit is configured for 8f2 speakers when it is dispatched from the factory.
When connecting to 6f_ speakers, carry out the following procedure to switch to 6_.
Set this unit to the standby mode.
Press _ while pressing and holding STRAIGHT on the front panel.
Release the keys when "ADVANCED SETUP" is displayed on the fiont panel display.
After approximately 3 seconds, the top menu items are displayed. ;25_
J, Surround
speaker R
STRAIGHT
Center speaker
Surround speaker L
• Connect at least two speakers (fiont left and fight).
• If you cannot connect all five speakers, give priority to the surround speakers.
• The surround speakers should be placed between 60 degrees and 80 degrees from the listening position.
#_ Check that "SP IMP." is displayed on the front panel.
@
Press STRAIGHT repeatedly to select a "6_MIN."
Switch this unit to the standby mode, and then switch it on again.
The power turns on, when the settings you made has been configured.
• CRT monitors
We recommend that you use magnetically shielded speakers to avoid video distortion, especially for
the front and center speakers near the screen.
If your screen still gets interference from magnetically shielded speakers, move the speakers farther
away from your TV.
: See lhe seclion nn "Exlended functionality lhal can be configured as needed {Advanced Selup menu)" for details nn the
Advanced Setup menu (_ p. 53).
En 10
Loading ...
Loading ...
Loading ...