Majestic 500DVMNSC Direct Vent Natural Gas Fireplace

User Manual - Page 49

For 500DVMNSC.

PDF File Manual, 68 pages, Read Online | Download pdf file

500DVMNSC photo
Loading ...
Loading ...
Loading ...
49
75D2525
DVM Series Direct Vent Gas Fireplace


The replace and venting system should be inspected before initial use and at least annually
by a qualied eld service person. Inspect the external vent cap on a regular basis to make
sure that no debris is interfering with the airow. Inspect entire venting system to ensure proper
function.

Thoroughly clean the inside of the glass door after using the replace for ten hours. Periodically
clean the glass door as necessary.
When cleaning the glass, remember:
 Allow glass to cool before removal.
NEVER use abrasive materials.
Keep children and pets a safe distance away.
Never operate the replace without the glass door properly secured.
Never operate the replace if the glass is broken.
Replace any glass that is chipped, cracked, or broken. Replacement glass door assem-
blies MUST be supplied by the replace manufacturer 

Handle glass door with care to avoid striking or scratching it on hard objects.
To clean glass door, follow “Glass Removal” procedure outlined in the Canopy Installation and
Glass Removal section. Film deposit on the inside of the glass should be cleaned off using a
nontoxic, non-corrosive, non-abrasive, mild cleaning solution. Simply apply an adequate amount
to the glass and wipe off with a damp cloth. After all maintenance has been completed, re-install
glass door.

Leave logs installed in the replace for cleaning. Vacuum surface of the logs with a brush attach-
ment. If logs must be removed for cleaning, handle carefully by holding gently at each end.
Gloves are recommended to prevent skin irritation from ceramic bers. If skin becomes irritated,
wash gently with soap and water. Vacuum surface of logs with brush attachment or brush logs
with a soft bristle brush (i.e. clean, dry paintbrush). To place logs back in the replace, see the
Log and Rock Wool Installation.
 

Replace or add rock wool as required following installation instructions in the Log and Rock
Wool Installation section of this manual.
Loading ...
Loading ...
Loading ...