Loading ...
Loading ...
Loading ...
45
75D2525
DVM Series Direct Vent Gas Fireplace
Remove top louver assembly before installing eyebrow.
1. Unhook top louver assembly. Set aside. Figure 55
2. Attach canopy to underside of top outer shell with three
(3) screws provided. Figure 56
3. Hook top louver assembly back into place.
1. Remove louver assembly from the top.
2. Release three (3) clamps on bottom of replace. Figure
57
3. Tilt glass frame out and lift glass frame up until it clears
hook on top of replace.
4. Set glass frame aside.
Figure 55 -
Remove Top Louver Assembly
Louver
Assembly
FP2417
Figure 56 -
Install Canopy
Eyebrow
Screws
FP2418
Figure 57 -
Remove Glass Frame
Glass
Frame
Clamps
FP2419
WARNING
!
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
1. Install oor brick before installing logs or rock wool.
2. Install the rear brick panel by sliding it over the existing
bracket fastened to the rear of the rebox.
3. Remove the existing screws fastened to the sides of the
rebox toward the tops.
4. Slide the right panel into place and secure the panel
using one of the brackets provided with the kit and one
of the screws removed earlier.
5. Repeat step 3 for the left panel.
Loading ...
Loading ...
Loading ...