Loading ...
Loading ...
Loading ...
88
English
Maintaining your appliance
Replacing the oven door (Lower oven only)
1. Using two hands, grasp the side edges
of the door at the midpoint. Face the
oven cavity.
2. Locate the slots on each side of the
oven cavity for the door hinge locks.
3. Hold the door at a 45° angle, and then
align the door hinges with the slots
in the lower front of the oven cavity.
Slowly insert the door, making sure
you maintain the 45° angle. You will
know the door is engaged in the slot
when you feel a slight drop.
Follow these instructions carefully to avoid personal injury and property damage.
For safety reasons, you cannot remove the door of the upper oven.
Slot in oven
cavity
4. Fully open the oven door. (If the door
does not open 90°, repeat Steps 1 – 3.)
5. Flip the hinge locks in the bottom
corners of the oven door toward the
oven chamber to lock the hinges. See
Step 3 (Locked/Unlocked) in the
Removing the oven door" procedure.
6. Close the oven door. (If the door is
properly installed, there is an even
gap between it and control panel; if
the gap is fatter on one side, the hinge
on that side is improperly installed.)
7. Reconnect the LED's wire harness.
CAUTION
After replacing the door, make sure to reconnect the wires. Push them inward to arrange
them as they were before you removed the door. Wires that are not connected or
arranged correctly can be caught in the door or damaged by heat.
Loading ...
Loading ...
Loading ...