DXS-1210 User Manual

Loading ...

D-Link DXS-1210 Series User Manual

Destination Port: Select the destination port value.

IP Precedence: Select the IP precedence value. Options to choose from are 0 (routine), 1 (priority), 2

(immediate), 3 (flash), 4 (flash-override), 5 (critical), 6 (internet), and 7 (network).

ToS: Specify the Type-of-Service (ToS) value that will be used. Options to choose from are 0 (normal), 1

(min-monetary-cost), 2 (max-reliability), 3, 4 (max-throughput), 5, 6, 7, 8 (min-delay), 9, 10, 11, 12, 13,

14, and 15.

DSCP (0-63): Enter the DSCP value. And the range is between 0 and 63.

TCP Flag: Select the appropriate TCP flag option to include the flag in this rule. Options to choose from are

ack, fin, psh, rst, syn, and urg.

Time Range: Enter the time range.

Action: Select the action for the rule. The values are Permit and Deny.

After selecting UDP as the Protocol Type, click the IPv4 Address, Port and IPv4 DSCP tabs to display the

following page:

Figure 4.142 – ACL > ACL Configuration Wizard – Create IPv4 ACL-UDP

Source: Select the source information. The values are Any, Host and IP.

Destination: Select the destination information. The values are Any, Host and IP.

Source Port: Select the source port value.