Loading ...
Loading ...
Loading ...
D-Link DXS-1210 Series User Manual
37
Management > Session Timeout
The Session Timeout page allows you to configure the session timeout on the Switch.
Figure 4.56 – Management > Session Timeout
Web Session Timeout (60-36000): Enter the time in seconds of the web session timeout. Tick the Default
check box.
Console Session Timeout (0-1439): Enter the time in minutes of the Console session timeout. Tick the
Default check box to return to the default setting. The value is from 0 to 1439 minutes. 0 means never
timeout. The default value is 30 minutes.
Telnet Session Timeout (0-1439): Enter the time in minutes of the Telnet session timeout. Tick the Default
check box to return to the default setting. The value is from 0 to 1439 minutes. 0 means never timeout. The
default value is 30 minutes.
Click the Apply button to save your settings.
Management > D-Link Discover Protocol Settings
The D-Link Discover Protocol Settings page allows you to configure and display D-Link Discovery Protocol
(DDP).
Figure 4.57 – Management > D-Link Discover Protocol Settings
D-Link Discovery Protocol State: Enter the enable or disable the D-Link Discovery Protocol state.
Report Timer: Specify the interval in seconds between two consecutive DDP report messages. Options to
choose from are 30, 60, 90,120, and Never.
DDP Port Settings:
From Port / To Port: Enter the appropriate port range used for the configuration.
State: Select to enable or disable the DDP port state.
Click the Apply button to save your settings.
Loading ...
Loading ...
Loading ...