Loading ...
Loading ...
Loading ...
D-Link DXS-1210 Series User Manual
7
• Install the power supply before connecting the power cable to the power supply.
• Unplug the power cable before removing the power supply.
• If the system has multiple sources of power, disconnect power from the system by
unplugging all power cables from the power supplies.
• Move products with care; ensure that all casters and/or stabilizers are firmly connected to the system.
Avoid sudden stops and uneven surfaces.
Caution: Suitable for installation in Information Technology Rooms in accordance with Article
645 of the National Electrical Code and NFPA 75.
PRUDENCE: Équipement conforme à la clause 62368-1 pour l'installation :
Convient pour une installation dans les salles informatiques conformément à l'article 645 du
National Electrical Code et à la norme NFPA 75.
Caution: The device can only be used in a fixed location such as a lab or a machine room.
When you install the device, ensure that the protective earthing connection of the socket-outlet
is verified by a skilled person.
PRUDENCE: L'appareil ne peut être utilisé que dans un lieu fixe, tel qu'un laboratoire ou une
salle de machines. Lorsque vous installez l'appareil, assurez-vous que le raccordement à la
terre de protection de la prise de courant a fait lobjet dune vérification par une personne
qualifiée.
Step 1: Unpacking
Open the shipping carton and carefully unpack its contents. Please consult the packing list located in the
User Manual to make sure all items are present and undamaged.
One D-Link DXS-1210 Series switch
One Multilingual Getting Started Guide
User Guide CD
One RJ-45 console cable
Power Cord and Power Cord Retainer
Rack-mount kit and Rubber Feet
If any item is found missing or damaged, please contact the local reseller for replacement.
Step 2: Switch Installation
For safe switch installation and operation, it is recommended that you:
Visually inspect the power cord to see that it is secured fully to the AC power connector.
Make sure that there is proper heat dissipation and adequate ventilation around the switch.
Do not place heavy objects on the switch.
Desktop or Shelf Installation
When installing the switch on a desktop or shelf, the rubber feet included with the device must be attached
on the bottom at each corner of the device’s base. Allow enough ventilation space between the device and
the objects around it.
Figure 2.1 – Attach the adhesive rubber pads to the bottom
Loading ...
Loading ...
Loading ...