Loading ...
Loading ...
Loading ...
Usingthe self-cleaning upper and lower ovens.
The oven doors must be closed and all controls set correctly for the cycle to work properly.
[][][][]D
[]DDDD
How to Delay the Start of Cleaning
[Z] Touch the SELFCLEAN pad.
A 3-hour self-clean time is recommended
for use when cleaning small, contained
spills.A self-clean time of 5 hours is
recommended for a dirtier oven.
Ifa time other than 5 hours or :3hours is
needed, use the number pads and enter
the desired clean time.
Youcan change the clean time to any time
between 3 hours and 5 hours, depending on
how dirty your oven is.
[] Touch the DELAYSTARTpad.
[] Usingthe number pads, enter the time of
day you want the clean cycle to start.
The upper and lower oven doors lock
automatically. The cooktop elements are also
locked out during self-clean. The display will
show the start time. It will not be possible
to open the oven doors or use the cooktop
until the temperature drops below the lock
temperature and LOCKED/DOOR_ goes off in
the control display.
When LOCKED/DOOR_ goes off, you will be
able to open the doors.
[] Touch the STARTpad.
After a Clean Cycle
You may notice some white ash in the oven.
Wipe it up with a damp cloth after the oven
cools.
If white spots remain, remove them with a
soap-filledsteel wool pad and rinse thoroughly
with a vinegar and water mixture.
Thesedeposits are usually a salt residue that
cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle,
repeat the cycle.
You cannot set the oven for cooking or
another self-clean cycle until the oven is cool
enough for the door to unlock.
While the oven is self-cleaning, you can touch
the CLOCKpad to display the time of day.
To return to the clean countdown, touch the
SELFCLEANpad.
If the racks become hard to slide,apply a
small amount of cooking oil to a paper towel
and wipe the edges of the oven racks with
the paper towel.
30
Loading ...
Loading ...
Loading ...