Loading ...
Loading ...
Loading ...
/k
WARNING: To maintain proper
tool grounding, whenever the outlet you
are planning to use for this power tool
is of the two prong type do not remove
or alter the grounding prong in any man-
ner.
An adapter is available for connecting plug to
2-prong receptacles. The green grounding lead
extending from the adapter must be connected
to a permanent ground such as to a properly
grounded outlet box. (Figure 84)
Grounding Lug
/ _ Make Sure This ls
3 Pron _ Plu n _) _ I _-- H Connected To A
- _ _ _i _- ,
• --_ !(__) [1 Known Ground
,_"_ _ Receptacle
Adapter
Extension Cord
The use of any extension cord wilI _at_N
some loss of power. Use the following._a.b.Te
to determine the minimum wire size
(A.W.G.) extension cord. Use only 3- wire ex-
tension cords which have 3-prong grounding
type plugs and 3-pole receptacles which ac-
cept the tool's plug.
Length of
Conductor
Wire sizes Required
(American Wire Gage No.)
120V Lines
0 - 25 feet No. 16
26 - 50 feet No. 14
51 - !00 feet No. 12
For circuits that are farther away from electri-
cal circuit box, the wire size must be in-
creased proportionately in order to deliver
ample voltage to the saw motor.
Fig. 84 - Adapter for 2-Prong Receptacles
_i, WARNING: The adapter illustrated
is for use only if you already have a
properly grounded 2-prong receptacle.
35
Loading ...
Loading ...
Loading ...