Loading ...
Loading ...
Loading ...
English 75
Maintenance
Burner grates and components
Turn off all surface burners, and make sure they are all cooled down.
1
3
2
1. Remove the burner grates.
2. Remove the burner caps from the burner
heads.
3. Remove the burner heads from the
valve manifolds to reveal the starter
electrodes.
4. Clean all removable grates and burner
components in warm, soapy water. Do
not use steel-wool pads or abrasive
cleaners.
5. Rinse and dry grates and burner
components thoroughly.
6. Reinstall the burner grates in their
respective positions.
7. Turn on each burner and check if it
operates properly. After verifying that a
burner operates normally, turn it off.
Brass burner head
NOTES
• The brass parts of your burner will
change color with use. However, this
will not affect performance and you
can clean the brass parts with a brass
cleaner.
• Clean that the burner port openings
aren't plugged.
• Do not wash in the dish washer.
CAUTION
• The starter electrodes are not removable. Do not attempt to remove them by force.
• To avoid chipping, do not bang grates and caps against each other or hard surfaces such
as cast iron cookware.
NY58J9850WS_DG68-00692A-00_EN.indd 75 2015-07-07 11:45:21
Loading ...
Loading ...
Loading ...