User Manual - Page 48

For IM6.

Loading ...
Loading ...
Loading ...
47
Installation Instructions
INSTALL THE ICEMAKER FILL CUP
Install the icemaker fill cup (side-mounted) (17) into the
icemaker as shown.
5
MOUNT THE ICEMAKER
Lift the icemaker so the fill tube (16) fits in the fill
cup opening (E). Hang the icemaker on the two
mounting screws (C).
Make sure:
The power cord is still firmly in the socket.
The fill tube (16) extends into the fill cup opening
on the back of the icemaker. (Check the rear of
the refrigerator to make sure the fill tube has not
been pushed out of the back of the refrigerator).
THEN SECURELY TIGHTEN THE ICEMAKER
MOUNTING SCREWS.
7
16
E
C
PLUG IN THE ICEMAKER
Holding the icemaker in
place, insert the icemaker
power cord plug (D) into
the socket on the rear
wall, making sure the
prongs and holes are
matched. If holes do not
match, see Step 4. Press
the plug firmly into the
socket.
6
D
INSTALL THE ICE BUCKET
Install the freezer shelf in the lowest position. Place
the ice bucket (11) on the shelf under the icemaker.
Make sure the icemaker power switch is set to OFF.
8
11
ATTACH WARRANTY LABEL
A label (9) is provided with this kit to record the date
of installation for warranty purposes. Apply it to the
back of the refrigerator.
9
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner’s Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section.
10
POWER CORD ADAPTER
(on some models)
There is a power cord adapter (18) included with
the kit. Visually inspect to see if the power cord on the
icemaker matches the socket on the rear wall of the
freezer compartment. If needed, secure the adapter
to the side of the icemaker power cord. When
connecting the adapter to the power cord, make sure
the seal is in place between the connectors, and ensure
that both connector locks are snapped in place. Secure
the power cord adapter to the icemaker by putting it
into the hook at the back of the icemaker and attaching
it to the icemaker with a wire tie (20).
4
Hook
Seal
Locks
17
Loading ...
Loading ...
Loading ...