Loading ...
Loading ...
Loading ...
23
Installation Instructions
PLUG IN THE ICEMAKER
Place the icemaker on its side as shown. Insert the
icemaker power cord plug (B) into the socket,
making sure the prongs and holes are matched.
If holes do not match, see Step 6. Press the plug
firmly into the socket.
8
MOUNT ICEMAKER
• Lift the icemaker so the fill tube (16) fits in the fill
cup opening (C). Hang the icemaker on the two
mounting screws (A).
Make sure:
• The power cord is still firmly in the socket.
• The fill tube (16) is still in the fill cup opening.
(Check the rear of the refrigerator to make sure
the fill tube has not been pushed out of the back
of the refrigerator.)
• The icemaker mounting screws are located in
the uppermost position of the mounting slots.
THEN TIGHTEN THE ICEMAKER MOUNTING SCREWS
SECURELY.
9
7
INSTALL THE ICE BUCKET
Put the ice bucket (11) in place under the icemaker.
Make sure the icemaker power switch is set to OFF.
10
11
ATTACH WARRANTY LABEL
A label (9) is provided with this kit to record the date
of installation for warranty purposes. Apply it to the
back of the refrigerator.
11
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner’s Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section.
12
16
C
A
B
INSTALL THE ICEMAKER FILL CUP
Install the icemaker fill cup (side-mounted) (17) into
the icemaker as shown.
POWER CORD ADAPTER
(on some models)
There is a power cord adapter (18) included with
the kit. Visually inspect to see if the power cord on the
icemaker matches the socket on the side wall of the
freezer compartment. If needed, secure the adapter
to the side of the icemaker power cord. When
connecting the adapter to the power cord, make sure
the seal is in place between the connectors, and ensure
that both connector locks are snapped in place. Secure
the power cord adapter to the icemaker by putting it
into the hook at the back of the icemaker and attaching
it to the icemaker with a wire tie (20).
6
Hook
Seal
Locks
17
Loading ...
Loading ...
Loading ...