Loading ...
Loading ...
Loading ...
19
PLUG IN THE ICEMAKER
Hold the icemaker in the freezer compartment as
shown. Insert the icemaker power cord plug (D)
into the socket, making sure the prongs and holes
are matched. If holes do not match, see Step 6.
Press the plug firmly into the socket.
8
Installation Instructions
MOUNT ICEMAKER
• Lift the icemaker so the fill tube extension (10)
fits in the fill cup opening (C). Hang the icemaker
on the two mounting screws (A).
Make sure:
• The power cord is still firmly in the socket.
• The fill tube extension (10) is still in the fill cup
opening. (Check the rear of the refrigerator to
make sure the fill tube has not been pushed out
of the back of the refrigerator.)
• The icemaker mounting screws are located in
the uppermost position of the mounting slots.
THEN TIGHTEN THE ICEMAKER MOUNTING SCREWS
SECURELY.
9
INSTALL THE ICEMAKER FILL CUP
Install the icemaker fill cup (side-mounted) (17) into
the icemaker as shown.
7
INSTALL THE ICE BUCKET
Put the ice bucket (11)
directly under the
icemaker (to the left and
all the way to the rear of
the shelf under the
icemaker).
Make sure the icemaker
power switch is set to
OFF.
10
11
ATTACH WARRANTY LABEL
A label (9) is provided with this kit to record the date
of installation for warranty purposes. Apply it to the
back of the refrigerator.
11
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner’s Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section.
12
10
C
A
D
POWER CORD ADAPTER
(on some models)
There is a power cord adapter (18) included with
the kit. Visually inspect to see if the power cord on the
icemaker matches the socket on the side wall of the
freezer compartment. If needed, secure the adapter
to the side of the icemaker power cord. When
connecting the adapter to the power cord, make sure
the seal is in place between the connectors, and ensure
that both connector locks are snapped in place. Secure
the power cord adapter to the icemaker by putting it
into the hook at the back of the icemaker and attaching
it to the icemaker with a wire tie (20).
6
Hook
Seal
Locks
17
Loading ...
Loading ...
Loading ...