Loading ...
Loading ...
Loading ...
EN
58
Display Operating Procedure
Description
PreBrewing
disabled
“Machine ON” Programming
• This parameter allows the user to enable
or disable the pre-brewing (also called
pre-infusion) function.
• When enabled the user is able to
program buttons 1-4. Each button may
have different programming.
• Pre-brewing has two values to adjust for
each button. “ON” time is the amount
of time (in seconds) that the brew valve
is open during during the prebrewing
cycle. “OFF” is the amount of time
(in seconds) that the brew valve is off
during the prebrewing cycle. After
the pre-brewing cycle has completed,
the normal brew cycle continues until
complete.
• This parameter is not available on MP
paddle versione where pre-infusion is
controlled manually by the paddle.
Pre-Infusion or Pre-Brewing
1
Enter into “Machine On” programming mode.
2
Press the button to enter into programming mode.
3
Then press the button to access the adjustable parameters.
4
Scroll through the displayed parameters using the button until the following display appears:
5
Press the button or the button to change the value of the parameter.
6
When enabled, additional parameters are displayed, press the button or the button to change the
value.
7
When nished press the button to continue to the next parameter. Repeat steps 6-7 for all 4 buttons.
A value of zero disables this feature on the corresponding button.
NOTE: It is also possible to enable and disable this parameter using the “Quick Keys”. Please see the section
titled “Quick Keys”
Doses Setting
Select within30s
Clock Adjust
200.5
o
F 06:30
La Marzocco T:00
PreBrewing
enabled
PreBrew ON sec
Espresso 0.6
PreBrew OFF sec
Espresso 0.1
Loading ...
Loading ...
Loading ...