Loading ...
Loading ...
Loading ...
EN
33
Display Operating Procedure
Description
Accessing Programming Mode
• To change the values of any parameter
the operator must rst enter into the
programming mode.
• There are two levels within the
programming mode that allow the
programming of specic parameters.
• The two programming levels are as
follows
• Machine “On” - The parameters
contained within this level are ones
the operator can change to affect the
quality of the espresso.
• Machine “Off” - The parameters
contained within this level are ones
the operator can change to affect the
performance of the espresso machine.
These parameters are set at the factory
and there is no need for adjustment. La
Marzocco reccomends that no changes
are made at this level.
Programming Mode
LaMarzocco 9:30
Machine On Programming Level
1
While the espresso machine is on, press and hold the button . After approximately 5 seconds the fol-
lowing display appears.
2
This is the “Machine On” programming level. To program the dispense volume for each button see “Water
Volume Programming”. To access the “Machine On” programming mode press the button
.
Note: You must scroll, using the
button, to the end to exit programming mode.
Machine Off Programming Level
1
While the espresso machine is off, press and hold the button . After approximately 10 seconds the
following display appears.
2
This is the “Machine Off” programming level.
Press the button to scroll through the available parameters.
Note: You must scroll to the end to exit programming mode.
200.5
o
F 09:30
La Marzocco T:00
Doses Setting
Select within50s
OFF 09:30
Language
ENGLISH
Loading ...
Loading ...
Loading ...