Loading ...
Loading ...
Loading ...
EN
48
Display Operating Procedure
Description
Water filter
0
• This parameter allows the technician
to preprogram an alarm that noties
the user when the water lter requires
service or replacement.
• When the programmed volume of
water has passed through the espresso
machine the error message “Change
Filter” is displayed.
• A value of 0 (zero) disables the lter
alarm parameter.
“Machine OFF” Programming
Water Filter Alarm
1
Enter into “Machine Off” programming mode.
2
Scroll through the displayed parameters using the button until the following display appears:
3
Press the button or the button to change the value of the asing parameter.
4
When nished, press the button to continue to the next parameter.
5
When the espresso machine has dispensed the value of this parameter the message FILTER ALARM will
appear.
NOTE: To reset this message turn off the espresso machine using the main power switch.
Then, press and hold the button
and the button and turn on the machine using the main power
switch.
Hold both buttons until the following message appears. Release both buttons and continue to use the
espresso machine as normal.
Language
ENGLISH
Water filter
0
OFF 09:30
Filter
Alarm
Filter
Reset
Loading ...
Loading ...
Loading ...