Mountfield MCS 50 LI 12" Cordless chainsaw

Operation Manual - Page 196

For MCS 50 LI.

PDF File Manual, 332 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
EN - 19
14. TROUBLESHOOTING
PROBLEM PROBABLE CAUSE SOLUTION
1. 
is pressed, the blue
light does not light up




2. 
is pressed, the blue light
does not switch on and the
Attention” icon lights up
 
status and recharge if

3. 
button when the throttle

are pressed, the motor
does not start and the
"Attention" icon lights up
Incorrect starting procedure Follow the instructions
(see par. 6.4)
4. The motor shuts down

 

Machine damaged Do not use the machine

Contact a Service Centre.
5. The motor stops whilst


 
status and recharge if

6. 
and throttle trigger lever on,
the chain does not turn
Excessive chain tensioning Retension the chain (par. 6.1.3).
Bar and chain problems 

not deformed (par. 8.3, 8.4).
Machine damaged. Do not use the machine.

the machine, remove

Contact an Authorised
Service Centre.
7. The chain heats and

end part of the bar.
Excessive chain tensioning Retension the chain (par. 6.1.3).
 Fill the lubricant oil
(par. 7.3).
8. 

Bar and chain problems 

are not deformed.
9. No oil is released
 

pipes with liquid detergent
and change the oil.
Lubrication holes are clogged Cleanthe lubrication
holes (chapter 7.6)
Loading ...
Loading ...
Loading ...