Loading ...
Loading ...
Loading ...
EN - 7
1. Sound power level
2.
3. Month/Year of manufacture
4.
5. Power voltage
6. Serial number
7. Name and address of Manufacturer
8. Article code
9. Length of the guide bar
10. Dual insulation
IMPORTANT Quote the information on
the product identification label whenever
you contact an authorised service centre.
IMPORTANT The example of the
Declaration of Conformity is provided
on the last pages of the manual.
3.4 MAIN COMPONENTS
The machine is composed of a series
of main components that have the
following functions (Fig.1):
A. Motor: supplies the drive power
to the cutting means.
B. Front hand grip: support hand grip
located on the front of the chainsaw. This
should be grasped using the left hand.
C. Rear hand grip: support hand grip located
on the rear of the chainsaw. This should be
grasped using the right hand. This hand
D. Front hand guard: protection device seated
between the front hand grip and the toothed
chain, to protect the hand against injuries
E. Fastening point: coupling device
used to fasten the chainsaw to a rope
operator's harness using clasp clips.
F. Guide bar: supports and
guides the toothed chain.
G. Toothed chain: cutting element,
small blades called "teeth" and side
H. Chain restraint pin
prevents uncontrolled movements of the
I. : device installed
point acting as a pivot when it comes
handling, transportation or storage
of the machine. This guard must be
removed when using the machine.
K. : chainsaw cover on the
transportation or storage of the machine.
L. (if not supplied with the machine,
see par. 15.1. “accessories on request):
device that supplies electric current to the
M. (if not supplied with
the machine, see par. 15.2 “accessories
on request): device used to recharge
available: M1
M2
N.
par.15.4): device used to store batteries.
O. Connection cable: cable used to connect
P.
request. par.15.5): device that allows
inserted in the machine housing.
4. ASSEMBLY
The safety regulations to follow
are described in chap. 2. Strictly
comply with these instructions to
avoid serious risks or dangers.
For storage and transport purposes, some
Unpacking and completing the assembly
should be done on a at and stable surface,
with enough space for machine handling
and its packaging, always making use of
suitable equipment. Do not use the machine
until all the instructions provided in the
“ASSEMBLY” section have been carried out.
4.1 ASSEMBLY COMPONENTS
Toothed chain
Documentation
Loading ...
Loading ...
Loading ...