Loading ...
Loading ...
Loading ...
EN - 15
7. ROUTINE MAINTENANCE
7.1 GENERAL INFORMATION
The safety regulations to follow
are described in chap. 2. Strictly
comply with these instructions to
avoid serious risks or dangers.
Before conducting any inspections,
cleaning or maintenance/adjustment
interventions on the machine:
• Stop the machine;
• Wait until the chain is stationary;
• Remove the battery from its housing;
• Apply the bar cover, except when working
directly on the chain or bar itself.
• Wait until the motor is suciently cold;
• Read the relevant instructions;
• Use suitable clothing, protective
gloves and goggles;
•
are summarised in the "Maintenance
It summarises the main interventions to
•
assembled spare parts and attachments
•
IMPORTANT Any maintenance and
adjustment operations not described in
this manual must be carried out by your
dealer or Authorised Service Centre.
7.2 BATTERY
7.2.1
a. environmental factors, that cause
–
b. operator behaviour that should be avoided:
–
– adopting a cutting technique that
performed (par. 6.6, par. 6.7).
•
• use the most appropriate technique
If the need arises to use the machine for
•
7.2.2
1.
(Fig. 37.A)
2. remove the
(Fig. 37.B)
3.
charger housing (Fig. 39.B).
4.
the one indicated on the rating plate.
5.
NOTE The battery is equipped with a guard
that inhibits recharging if the environmental
temperature is not between 0 and +45 °C.
NOTE The battery can be recharged at any
time, even partially, with no risk of damaging
it.
When recharging is completed:
1.
charging when recharging is completed).
2.
the electrical outlet (Fig. 40.B).
3. into its housing on the
machine (Fig. 21.B) or in one compartment of
.
4.
and guarantees the electrical contact.
Loading ...
Loading ...
Loading ...