Loading ...
Loading ...
Loading ...
W415-2044 / C / 08.20.21
EN
6
general information
2.0 general information
!
WARNING
• This appliance and its components are designed to be installed and operated as a system. Any alteration to or
substitution for items in this system, unless allowed by these installation instructions, will void the CSA Group
listing and may void the product warranty. It may also create a hazardous installation. Read through these
instructions thoroughly before starting your installation and follow them carefully throughout your project.
2.1 specifi cations
!
WARNING
• Before installing this appliance, contact the local building or fi re authority and follow their guidelines.
• This appliance must be installed by a qualifi ed installer. Follow the installation directions. Do not operate without
fully assembling all components.
• If this appliance is not properly installed, a house fi re may result.
• Do not expose the appliance to the elements (ex. rain, etc.) and keep the appliance dry at all times. Wet
insulation will produce an odour when the appliance is used.
• This appliance is hot when operated and can cause severe burns if contacted. Children and pets must be kept
from touching the appliance when it is hot. Contact your local authorized dealer/distributor for safety screens
that may be available for this product.
• Combustible material such as fi rewood, wet clothing, etc. placed too close can catch fi re. Objects placed in
front of the appliance must be kept a minimum of 48” (121.9cm) from the front of the appliance.
• All wiring should be done by a qualifi ed electrician and shall be in compliance with local codes and with the
current National Electric Code ANSI/NFPA No. 70 (in the United States), or the current CSA C22.1 Canadian
Electric Code (in Canada).
• This wood heater contains a catalytic combustor, which needs periodic inspection and replacement for proper
operation. It is against United States Federal regulations to operate this wood heater in a manner inconsistent
with operating instructions in this manual, or if the catalytic element is deactivated or removed.
• Do not use a fi replace insert or other products not specifi ed for use with this fi replace.
2.2 general instructions
Emissions1.38g/hr
Effi ciency
OverallLHVHHV
67.90%68.55%63.42%
Chamber (D.W.H.)13.75” x 25.75” x x12.5” (349mm x 654mm x 318mm)
Viewing Area391.22in² (2524cm²)
Capacity2.3 Cubic Feet (0.07 Cubic Meter)
Approximate Area Heated*Up to 3,000 Square Feet (279 Square Meter)
Heat Output**60,000 BTU (17.6 KW)
Duration Low Fire*17 hrs
Weight 551 lbs (249.9kg)
Ideal Wood Length25” (63.5cm)
Optional Blower318 CFM
Combustion AirInside or Outside
Electrical Draw< 12 Amps
Heat Output Range***14,215 to 42,203 BTU
Minimum Stack Height ****15 feet (4.5m)
Effi ciency StandardB415.1-10
* Figures will vary considerably with individual conditions.
** Wolf Steel Ltd. estimated realistic BTU/hr with hardwood logs and regular refueling.
*** Under specifi c test conditions conducted during EPA emission testing, this heater delivered heat at these
rates in the chart above. The heater operates at its best effi ciency when operated on high.
**** Required in order to achieve proper draft.
Loading ...
Loading ...
Loading ...