Loading ...
Loading ...
Loading ...
W415-2044 / C / 08.20.21
EN
4
table of contents
1.0 dimensions 5
2.0 general information 6
2.1 specifi cations 6
2.2 general instructions 6
2.3 rating plate information 7
2.4 high effi ciency heating 8
2.4.1 hot air gravity vent system (NZ220) 8
2.4.2 central heating system (NZ62CH) 9
2.4.3 blower circulation (NZ64) 9
3.0 installation planning 10
3.1 appliance placement 10
3.2 outside combustion air 11
3.3 fl oor protection 12
3.3.1 ember strip and hearth extensions 12
3.4 hearth examples 13
4.0 installation 14
4.1 chimney 14
4.2 typical chimney installation 15
4.3 adding chimney sections 16
4.4 offset chimney installation 17
4.5 installing fl ashing and storm collar 18
4.6 typical existing masonry 18
5.0 framing 19
5.1 clearance to combustibles 19
5.2 minimum enclosure clearances 20
5.3 minimum mantel clearances 20
6.0 finishing 21
6.1 ventilation openings 22
6.2 baffl e installation 23
6.3 faceplate installation 24
6.3.1 template removal 24
6.3.2 faceplate, hinge, ash lip and air
control arm installation 24
6.3.3 door installation 25
6.3.4 door gap adjustment 26
6.3.5 catalyst temperature monitor
installation 27
6.4 optional NZ64 blower installation 30
The information throughout this manual is believed to be correct at the time of printing. Wolf Steel Ltd. reserves
the right to change or modify any information within this manual at any time without notice. Changes, other than
editorial, are denoted by a vertical line in the margin.
note:
7.0 selecting wood 33
8.0 operation 34
8.1 appliance operation 34
8.2 bypass door 35
8.3 catalyst 36
8.4 operating sounds, smells and
characteristics 36
8.5 air control 36
8.6 fi re extinguishers / smoke and carbon
monoxide detectors 36
8.7 fuel loading and burn cycle 37
8.8 lighting a fi re 38
8.9 smoking 40
8.10 overnight burn 40
8.11 re-loading the appliance 40
9.0 maintenance 41
9.1 ash removal procedures 41
9.2 catalyst inspection and replacement 41
9.3 creosote formation and removal 44
9.4 run-away or chimney fi re 44
9.5 chimney cleaning 45
9.6 cast iron door glass and gasket
replacement 46
9.7 glass replacement 46
9.8 internal gasket replacement 47
9.9 care of glass 50
9.10 care of catalyst 50
9.11 care of plated parts 50
9.12 NZ64 blower replacement 51
10.0 replacement parts 52
10.1 overview 52
11.0 troubleshooting 54
11.1 general troubleshooting 54
11.2 catalyst troubleshooting 55
12.0 warranty 56
Loading ...
Loading ...
Loading ...