Loading ...
Loading ...
Loading ...
W415-2044 / C / 08.20.21
EN
30
fi nishing
This appliance is supplied with one micro (pressure) switch and a thermally
activated switch.
Ensure that the pressure switch actuating arm protrudes through the faceplate
when installed and moves freely.
The blower will only operate when the doors are fully closed.
• All wiring should be done by a qualifi ed electrician and shall be in compliance with local codes and with the
current National Electric Code ANSI / NFPA No. 70-Current (in the United States), or, with the current C22.1
Canadian Electric Code (in Canada).
!
WARNING
6.4 optional NZ64 blower installation
The blower on high will draw 3.0 amps using 120V or approximately
360 watts.
note:
Loading ...
Loading ...
Loading ...